[TR] TR3 frt. brake dust shields

[tom white]

When I installed the Revington rack & pinion steering in my TR3A the
instructions said to remove the dust shields.  I have never missed them.

Best regards,

Tom



> From: Dave1massey at cs.com
> Date: Sat, 7 Nov 2009 18:09:05 -0500
> To: triumphs at autox.team.net
> Subject: Re: [TR] TR3 frt. brake dust shields
>
> In a message dated 11/7/2009 1:07:41 PM Central Standard Time,
> agraham at execulink.com writes:
> > Just wondering how many TR3 owners are still using the dust shields
> > on their front brakes? Are they really necessary? Can understand why
> > competition prepared '3s do not use them, but how necessary are they
> > for street use?
> > Trying to piece together a front disc set-up and many of the dust
> > shields I have found have broken mounting tabs.
> > Thanks for any insights.
> > Angelo Graham
> >
>
> Good question and timely, too.  My TR3 came without dust shields.  I
> chalked it up to the DPO and was looking at fitting some TR6 shields that I
have
> as spares.  I even powder coated them. ;-)
>
> So, were they stock on a 57 and will TR6 shields fit?
>
> Dave
> _______________________________________________
>
> Support Team.Net  http://www.team.net/donate.html
>
> This list supported in part by the Vintage Triumph Register
> http://www.vtr.org
>
>
> Triumphs at autox.team.net
> http://autox.team.net/mailman/listinfo/triumphs
>
>
> http://www.team.net/archive

_________________________________________________________________
Hotmail: Trusted email with Microsoft's powerful SPAM protection.
http://clk.atdmt.com/GBL/go/177141664/direct/01/
http://clk.atdmt.com/GBL/go/177141664/direct/01/