[TR] thickness of clutch mc to slave line?

[Michael Moore]

Paul, my rule of thumb is to trust the factory and you won't go wrong.
There is no advantage to going to larger tubing as there is very  
little flow.
Mike Moore

On May 5, 2009, at 5:44 AM, dorpaul wrote:

> Hi,
>
> Is it correct to use the same size tubing
> between the Clutch MC and it's slave cylinder
> as that of the brake line (I think that's 1/8" tubing, right?).
> Is there any benefit to using a larger diameter tubing for this  
> line?  If so,
> I'll need to obtain fittings for the larger tube (from where?).
>
> Thanks, Paul Dorsey
> _____