[TR] tr-3 rear wing clamp?
Michael Moore
mmoore8425 at aol.com
Mon Mar 23 16:43:20 MST 2009
Gary, as i recall it's to hold the upper most rear most corner of the
fender on.
Mike Moore
TS 41723LO
On Mar 23, 2009, at 4:16 PM, Gary Nafziger wrote:
> I'm working on initial fitment of the rear wings and in purchasing
> cage nuts
> ect. I found that TRF was selling a rear "clamp" for the rear
> wings. It's a
> fairly heavy piece of metal approx. 3 inches long with a cage nut
> welded to
> it. The end opposite of the caged nut is bent 90 degrees but the
> bent out
> part is only about 1/4 inch. I can't figure out where or how they go.
> Anyone have any ideas?
>
> gary n.
> _______________________________________________
>
> Support Team.Net http://www.team.net/donate.html
>
> This list supported in part by the Vintage Triumph Register
> http://www.vtr.org
>
>
> Triumphs at autox.team.net
> http://autox.team.net/mailman/listinfo/triumphs
>
> You are subscribed as mmoore8425 at aol.com
>
> http://www.team.net/archive
More information about the Triumphs
mailing list