[TR] pertronix question(no fire in the hole-71 TR6

Bryan Loy paradise.712002 at yahoo.com
Mon Mar 9 07:47:37 MST 2009


Many thanks to those that replied w/sound advice to my questions about my pertronix not producing anything.  
  I turned the key over, make sure everything was hot, tested my test light against the hot side of the battery to make sure I had a good ground on it, the hit both sides of the coil, and nada.  Zip.  I had my daughter turn the key over while I did the same, again w/no results.  
  One thing I did notice, there is a bit of "wiggle" movement of the dist. when the engine is being cranked.  Is this normal?  I found one bolt that was loose and tightened it, but the movement is still there.  I don't remember ever seeing this before.  Any ideas?  Thanks in advance,
Bryan
19071 TR6


More information about the Triumphs mailing list