[TR] Bracket for door post TR3A

[Steve Ball]

OK List...here's another weird one for you.  I'm working on my '60 TR3A and 
I need new brackets that mount on the door-posts...both of my brackets were 
broken off decades ago.  These are the brackets that the "Door Check Assy" 
(Moss PN 803-600) attaches to so the door doesn't open too far.  There's one 
bracket on each door, and each one appears to be bent out of a single piece 
of metal, and welded to the door post from behind the fender (at least 
that's my guess).

I'm thinking I might have to fabricate the parts myself.  I have a photo of 
a supposed good bracket, but I am looking for more information before I 
tackle the fabrication job:
1.  Does anyone know of a source for these parts?
2.  Have any of you fabricated one, and if so, do you have a template I 
could copy?

Thanks in advance,

Steve Ball
Lompoc Ca
TS68164L

Email: banjonut at verizon.net