[TR] Need piece of rubber boot seal

David Lylis dlylis at gmail.com
Mon Jul 20 16:07:27 MDT 2009


"which certainly wouldn't grip very well"
Ah yes, an apt description of the process.  I have glued it in place but
painting contact adhesive in that little V is a real pain in the butt.
It is supposed to grip a flat edge but my car was missing the original and I
thought the aftermarket was a reproduction.  It is tough when you don't know
what you don't know.  The gripper one Joe describes sounds perfect for my
application.

On Mon, Jul 20, 2009 at 12:49 PM, Randall <tr3driver at ca.rr.com> wrote:

> > I have included a link to a picture of the rubber boot seal that I had
> > inquired about.  I need two 14" pieces and I have one.
> > http://i215.photobucket.com/albums/cc88/TRG69/P7201260.jpg
>
> Strange.  My cars have all been pre-60K, so my seals are different.  But
> aren't the later seals supposed to grip a flat edge of metal?  David's
> photo
> shows it gaping open, which certainly wouldn't grip very well ...
>
> -- Randall
> _______________________________________________
>
> Support Team.Net  http://www.team.net/donate.html
>
> This list supported in part by the Vintage Triumph Register
> http://www.vtr.org
>
>
> Triumphs at autox.team.net
> http://autox.team.net/mailman/listinfo/triumphs
>
> You are subscribed as dlylis at gmail.com
>
> http://www.team.net/archive


More information about the Triumphs mailing list