[TR] TR6 Windshield Frame Removal

[Dave1massey at cs.com]

In a message dated 7/12/2009 6:43:58 PM Central Daylight Time, 
jhassall at blacksburg.net writes: 
> There are also 4 bolts (2 each side) adjacent to the 2 nuts you 
> removed.  Those bolts are pinch bolts which clamp the windshield 
> posts (the ends of which are threaded for the nuts you removed).  It 
> may take a liberal application of your favorite juice to break the 
> rust loose, too.  Whatever you do, don't use a pry bar under the 
> windshield frame.  If the posts won't wiggle free, you might try 
> threading the nuts back on, then tapping the post ends with a BFH.
> 

Jim, I'll bet you have a TR4.  For the record, TR4's have two clamp bolts 
on each side, the TR6 has three.

More trivia to follow.

Dave