[TR] TR3 temperature sensor
Michael Lang
mlang99 at comcast.net
Sat Jul 11 18:53:36 MDT 2009
http://www.ply33.com/Repair/tempgauge
oliver wrote:
> i'd like to see those. where do i find them?
>
> --- On *Sat, 7/11/09, Michael Lang /<mlang99 at comcast.net>/* wrote:
>
>
> From: Michael Lang <mlang99 at comcast.net>
> Subject: Re: [TR] TR3 temperature sensor
> To:
> Cc: "'Rene REMOND'" <rene.p.remond at wanadoo.fr>,
> triumphs at autox.team.net
> Date: Saturday, July 11, 2009, 12:20 PM
>
> I grafted a new bulb and capillary tube on to my old gauge per the
> internet instructions and it is currently working quite well. I
> was not
> too picky about the style of the capillary tube so I bought the
> cheapest
> mechanical gauge that I could find to use a donor. If you have a high
> wattage soldering iron and basic soldering skill, it's not very
> hard to do.
>
> Mike
>
> Randall wrote:
> > or there are instructions on the Internet for how to try to
> > graft a tube and sensor from a replacement gauge onto your
> original gauge
> > while keeping the sensor cold so the ether does not evaporate
> during the
> > operation.
More information about the Triumphs
mailing list