[TR] Newbie

[Joe Curry]

Since he already indicated that he had removed the pushrod, I didn't think
it was necessary to repeat that part.

Joe

-----Original Message-----
From: triumphs-bounces at autox.team.net
[mailto:triumphs-bounces at autox.team.net] On Behalf Of jimmuller at rcn.com
Sent: Thursday, July 09, 2009 1:49 PM
To: Triumphs at autox.team.net
Subject: Re: [TR] Newbie

Joe "Fluif" Curry wrote:
> I have found that the best way to get a stuck piston
> out is to bang it gingerly on a block of wood until...

That's what I've done.  Just to fill in the dumb things that some of us
forget occasionally (and I ain't sayin' who), you must first remove the
circlip which holds the piston in the cylinder.
--
Jim Muller, and it wasn't me
This list supported in part by the Vintage Triumph Register
http://www.vtr.org


Triumphs at autox.team.net
http://autox.team.net/mailman/listinfo/triumphs

You are subscribed as spitlist at cox.net

http://www.team.net/archive