[TR] It might be possible, but....

[pethier at comcast.net]

----- "Adrian Jones" <adrianjones747 at earthlink.net> wrote:
> I've had the apron off - not as bad as I had thought (none of the
> caged nuts were rusted) and it was cool to see all the parts exposed. 
> However, it was real scary trying to position the apron back on
> without taking a gouge of paint off the fender.
> 
> A tip I read later was to lay down lots of masking tape on areas that
> you might bang the apron into.

Makes sense.  I also would not pass up the opportunity to anti-sieze the caged nuts.  You might have to do this again sometime.

Phil Ethier West Side Saint Paul Minnesota USA
1962 Triumph TR4 CT2846L   1979 Caterham 7
1993 Suburban  1994 Miata C-package  2007 Saturn Ion 3 2.4
pethier [at] comcast [dot] net   
http://forum.mnautox.com/forums   http://www.flickr.com/photos/pethier