[TR] Fw: Need SU HS6 Part Measurement or the part itself

[Terry Geiger]

Bill,

I was able to re-use the bracket and throttle linkeages from my TR6 when 
converting it to HS6's.

Joe Curto may be able to provide what you need.  http://www.joecurto.com/

Here are some pictures of the conversion:
http://www.geigergarage.com/images/TR6_SU/page01/index.htm

Terry Geiger
www.GeigerGarage.com


----- Original Message ----- 
From: "William Brewer" <wsb1960tr3a at att.net>
To: "Triumphs" <triumphs at autox.team.net>
Sent: Wednesday, January 21, 2009 1:09 PM
Subject: [TR] Fw: Need SU HS6 Part Measurement or the part itself


>     The HS6 part in the inquiry below is NLA from MOSS or anyone else that 
> I
> can find. If I could buy one used, I might make tooling to replicate it so
> other people could get HS6's on a TR3 or 6.
>
>     Bill in Tehachapi
>
> From: William Brewer <wsb1960tr3a at att.net>
> Subject: Need SU HS6 Part Measurement or the part itself
> To: triumphs at autox.team.net
> Date: Tuesday, January 20, 2009, 8:57 PM
>
>     I've picked up a pair of HS6's and am toying with fitting them on
> my TR3A. I am missing the "U" shaped sheet metal bracket that bolts
> between the carbs and holds the bell crank and spring (MOSS part # 
> 371-900).
> I
> was wondering if any listers have an extra laying around that they would 
> part
> with. If not, does someone currently have their HS6 (for TR4) carb bracket
> off
> of their car and could they trace an outline and give me the offset
> measurements
> (side view) so I could fabricate my own?
>     Contact me off list please.
>     TIA,
>
>     Bill Brewer
>     Tehachapi, CA