[TR] [6pack] Brake Bleeding Process

[Bob Danielson]

Well speed bleeders are waiting to be installed which prompted the questions
as I figure I'll be bleeding the brakes after installing them.

Bob Danielson
1975 TR6 CF38503U
Running w/ Throttle Body Injection
Toyota 5 Speed & Nissan LSD
http://tr6.danielsonfamily.org 

-----Original Message-----
From: Foster, Stan (HP IT) [mailto:stan.foster at hp.com] 
Sent: Wednesday, January 14, 2009 12:53 PM
To: Bob Danielson; triumphs at autox.team.net; '6-Pack'
Subject: RE: [6pack] Brake Bleeding Process

I'm not sure you have been doing it wrong vs different. Does that technique
not implement the same procedure that the speed bleeders use (open valve,
press pedal, close valve, release pedal) ?.

Stan


-----Original Message-----
From: 6pack-bounces at autox.team.net [mailto:6pack-bounces at autox.team.net] On
Behalf Of Bob Danielson
Sent: Wednesday, January 14, 2009 12:43 PM
To: triumphs at autox.team.net; '6-Pack'
Subject: Re: [6pack] Brake Bleeding Process

Thanks everyone..... I've obviously been doing it wrong which explains why
it takes so long to get the bubbles out. 


Bob Danielson
1975 TR6 CF38503U
Running w/ Throttle Body Injection
Toyota 5 Speed & Nissan LSD
http://tr6.danielsonfamily.org