[TR] Upgrading to a wood dash

[Dave1massey at cs.com]

In a message dated 12/31/2009 12:56:35 PM Central Standard Time, 
pethier at comcast.net writes: 
> I'd suggest doing both.  Buy a fresh roll of good masking tape.  Then 
> clamp the dash to a piece of hardwood.  Use a sharp drill.  You only get one 
> chance to do this right, so going over the top on prep may be worth it.
> 

Not if you drill a small pilot hole and then flip it over and drill the 
proper size from the front.

Dave