[TR] fender brace tr-3

[Andrew Uprichard]

The attachment points are about 6 inches forward of the rear leaf springs
attachment points.

Andrew Uprichard

-----Original Message-----
From: triumphs-bounces at autox.team.net
[mailto:triumphs-bounces at autox.team.net] On Behalf Of Gary Nafziger
Sent: Sunday, December 27, 2009 2:04 PM
To: triumphs at autox.team.net
Subject: [TR] fender brace tr-3

    I'm in the middle of fitting all the panels on my ground up restoration
project tr-3 and can't remember where the rear fender brace  (distance
piece?) attaches to the body.  This is the piece about 6" long that goes
right behind the rear wheel and holds the bottom of the fender straight.  I
think it attaches to the leaf spring but can't see anything on the spring to
attach it too.  Didn't notice anything in the Moss catalogue either.  Just
wondering.

gary n.
This list supported in part by the Vintage Triumph Register
http://www.vtr.org

You are subscribed as auprichard at comcast.net

Triumphs at autox.team.net
http://autox.team.net/mailman/listinfo/triumphs


http://www.team.net/archive