[TR] TR6 Steering wheel shaft bushings

[Bob Danielson]

You're probably referring to Art Lipp's DELRIN bushings
(http://tr6.danielsonfamily.org/SteeringColumn.htm) I think he gets about
$20 for them and it's a simple "press in" fit once you get everything apart.
No need to even remove the old bushings.


Bob Danielson
1975 TR6 CF38503U
Running w/ Throttle Body Injection
Toyota 5 Speed & Nissan LSD
http://tr6.danielsonfamily.org 

-----Original Message-----
From: triumphs-bounces at autox.team.net
[mailto:triumphs-bounces at autox.team.net] On Behalf Of Greg Gelhar
Sent: Monday, August 10, 2009 9:05 AM
To: triumphs at autox.team.net
Subject: [TR] TR6 Steering wheel shaft bushings

TR experts,

My  1973 TR6 steering wheel has some up and down motion. I have read here
that there is a press in bushing option that has worked for others.

Does anyone have the demensions to make these bushings? I have the equipment
and the material and am in need of a project.


Greg Gelhar
1973 TR6
1980 TR8
Osseo, MN





.
This list supported in part by the Vintage Triumph Register
http://www.vtr.org


Triumphs at autox.team.net
http://autox.team.net/mailman/listinfo/triumphs


http://www.team.net/archive