[TR] TR3 gas tank... Say it ain't so

[DLylis at aol.com]

You must loosen the tank so that you can move it and tip it, but I don't  
think completely remove it.  At least I didn't have to.  Having said  that, I 
found that the hose portion was too long and put way too much pressure  on 
the rear deck.  I assembled it all without the hose and got a measure of  
proper length so as to fit it with adequate amount for clamping.  
I think it was hose on tank, tank in place, then filler assembly.   Moving 
the tank in place with the hose on it required a bit of distortion to the  
hose until it got into place.  Be careful of crud falling into the tank  when 
doing this.
David  Lylis
69 TR6 CC26160L
60 TR3A TS74461LO
**************A Good Credit Score is 700 or Above. See yours in just 2 easy 
steps! 
(http://pr.atwola.com/promoclk/100126575x1220814852x1201410738/aol?redir=http:%2F%2Fwww.freecreditreport.com%2Fpm%2Fdefault.aspx%3Fsc%3D668072%26
hmpgID%3D62%26bcd%3DAprilfooter419NO62)