[TR] Rear brake cylinder installation kit question

[Tony Drews]

Exactly.  If the cylinder sticks in the backing plate, you'll have 
uneven wear on the brake shoes.

- Tony

At 12:31 AM 9/28/2008, Dave Connitt wrote:
>Thanks Randall and others,
>The guy at TRF had said to put the red grease on the sides of the cylinder
>which made no sense at all. By the way, I noticed that the rear brake piston
>seems to be designed to only push on one brake shoe. Is that correct? I
>think the clips that hold the brake cylinder in are starting to make sense..
>Does the brake cylinder slide in the opposite direction of the piston
>movement to operate the other brake shoe??
>Thanks,
>Dave Connitt
>_______________________________________________
>
>Support Team.Net  http://www.team.net/donate.html
>
>This list supported in part by the Vintage Triumph Register
>http://www.vtr.org
>
>
>Triumphs at autox.team.net
>http://autox.team.net/mailman/listinfo/triumphs
>
>You are subscribed as tony at tonydrews.com
>
>http://www.team.net/archive