[TR] TR3A Fuel Gauge Calibration
wbeech
wbeech at flash.net
Fri Sep 19 09:04:10 MDT 2008
My first stop would be the local Radio Shack, but here is a link to an
on-line supplier as well:
http://www.partsexpress.com/pe/pshowdetl.cfm?Partnumber=016-68
Bill B
'58 TR-3A TS/30766 L
'59 TR-3A TS/64974 LO
"A Triumph is man's best friend, it always comes when it is called...of
course, some times it is difficult to make it go"
-----Original Message-----
From: triumphs-bounces+wbeech=flash.net at autox.team.net
[mailto:triumphs-bounces+wbeech=flash.net at autox.team.net] On Behalf Of David
Willett and Carol Gray
Sent: Friday, September 19, 2008 8:10 AM
To: triumphs at autox.team.net
Subject: [TR] TR3A Fuel Gauge Calibration
In the procedure described in the "MGA With An Attitude" website for
calibration of a Jeager fuel gauge, the use of two 68 ohm resistors is
called for: can anyone tell me where I can purchase resistors like this?
Dave
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
Triumphs at autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
You are subscribed as wbeech at flash.net
http://www.team.net/archive
No virus found in this incoming message.
Checked by AVG - http://www.avg.com
Version: 8.0.169 / Virus Database: 270.7.0/1679 - Release Date: 9/18/2008
5:03 PM
More information about the Triumphs
mailing list