[TR] Hinges

[wbeech]

Andrew,
What if you drilled out the pin-hole to get it round again and stepped up to
a slightly larger pin?
Bill B
'58 TR-3A TS/30766 L
'59 TR-3A TS/64974 LO
"A Triumph is man's best friend, it always comes when it is called...of
course, some times it is difficult to make it go"
 

-----Original Message-----
From: triumphs-bounces+wbeech=flash.net at autox.team.net
[mailto:triumphs-bounces+wbeech=flash.net at autox.team.net] On Behalf Of
Andrew Uprichard
Sent: Monday, September 15, 2008 4:16 PM
To: triumphs at autox.team.net
Subject: [TR] Hinges

The (steel) hinges on my TR3B sag and the door drops down when the
sidescreens are fitted.  I had new pins inserted last year, but I don't
think it was enough.  Unfortunately the hinges are "personalized" for the
car:  the work involved in getting new hinges to fit is daunting.

Does anyone have the name of someone who could somehow restore these hinges
and tighten them up for me?

Andrew Uprichard
This list supported in part by the Vintage Triumph Register
http://www.vtr.org


Triumphs at autox.team.net
http://autox.team.net/mailman/listinfo/triumphs

You are subscribed as wbeech at flash.net

http://www.team.net/archive
No virus found in this incoming message.
Checked by AVG - http://www.avg.com
Version: 8.0.169 / Virus Database: 270.6.21/1671 - Release Date: 9/15/2008
9:21 AM