[TR] Fuel pump check valves

[Geo Hahn]

Some pumps used a little butterfly-shaped metal piece secured with one
or two screws to retain the check valves.  Others require the check
valves to be 'staked' to be held in place, i.e. metal along the edge
deformed with a punch to secure the valve.

Were your old valves a friction fit or can you see where they were staked in?

On 9/1/08, Andy <Andy.dixon at comcast.net> wrote:
> Sorry, That would be a '59 TR3A AC fuel pump.
> _______________________________________________
>
> Support Team.Net  http://www.team.net/donate.html
>
> This list supported in part by the Vintage Triumph Register
> http://www.vtr.org
>
>
> Triumphs at autox.team.net
> http://autox.team.net/mailman/listinfo/triumphs
>
> You are subscribed as ahwahnee18 at gmail.com
>
> http://www.team.net/archive