[TR] Spindle Nut Torque

[Michael Lang]

Randall,

Wow! Lots of good information. Based on this, I won't just throw it in
the press and start pushing on it.

Ken's approach sounds relatively easy to set up so I will have to give
it a try. I will let you know how it works.

Thanks,

Mike

Randall wrote:
> Michael :
>
> The rear hubs are typically so tight that the hub is not strong enough to be
> simply pressed off, without distorting the face of the hub.  You need to
> bolt something heavy that supports the face, similar to the way the original
> Churchill tool did. 
>
> Or, Ken describes an intriguing alternative here
> http://192.94.170.51/start/phorum/read.php?1,15880,15982#msg-15982
> that might be worth a try.  Haven't had occasion to try it myself yet, but I
> will when the time comes.
>
> Randall