[TR] TR6 seat belt inertia reel anchorage point

[Ann and Tim Buja]

My commission number is CC762xx.  There is a chrome bolt for the upper mount
in the wheel arch just below the folded hood frame but I couldn't find a
lower mounting point for the inertia reel.

Tim Buja - Rockford, IL - 80 TR8, 73 Stag, 72 TR6

-----Original Message-----
From: Tony Gordon [mailto:triumph at 2simpleusa.com]
I have two 72's and they both have mounting points ... I can measure the
location over the weekend on the parts car in the hope that you can locate
the exact point.  I would recommend trying to find the factory point if you
can since it will give you a much better mechanical fixing that a hole
drilled through the wheel arch alone.

What's the commission number of your car?  Mine are in the CC 79xxx and
80xxx range.