[TR] Trailing arm studs

[Bob Danielson]

 Kevin,
Having stripped a thread.....I go by feel. If you replace the threads with
Keen-Serts or Heli-Coils, you can crank them down as much as you want.


Bob Danielson
1975 TR6 CF38503U
Running w/ Throttle Body Injection
Toyota 5 Speed & Nissan LSD
http://tr6.danielsonfamily.org 


-----Original Message-----
From: triumphs-bounces+75tr6=tr6.danielsonfamily.org at autox.team.net
[mailto:triumphs-bounces+75tr6=tr6.danielsonfamily.org at autox.team.net] On
Behalf Of mrv8q at aim.com
Sent: Saturday, May 10, 2008 8:49 PM
To: Triumphs at autox.team.net
Subject: [TR] Trailing arm studs

Hello, what is the list's recommendation on replacing the 6 studs into the
TA assembly?
Finger tight, tighter, any use of Loctite, any other suggestions.....
Thanks!B 

Best, Kevin Browne '74 TR6
This list supported in part by the Vintage Triumph Register
http://www.vtr.org


Triumphs at autox.team.net
http://autox.team.net/mailman/listinfo/triumphs

You are subscribed as 75tr6 at tr6.danielsonfamily.org

http://www.team.net/archive
No virus found in this incoming message.
Checked by AVG. 
Version: 8.0.93 / Virus Database: 269.23.14/1425 - Release Date: 5/9/2008
12:38 PM