[TR] tr3 bonnet dzus fastners

[Andrew Uprichard]

The correct method to affix them is to tighten the aluminum piece down flat,
so they shouldn't rattle.  Other than that, I don't know what to say.
Andrew Uprichard

-----Original Message-----
From: triumphs-bounces+auprichard=comcast.net at autox.team.net
[mailto:triumphs-bounces+auprichard=comcast.net at autox.team.net] On Behalf Of
L1J1S at aol.com
Sent: Sunday, May 04, 2008 3:36 PM
To: triumphs at autox.team.net
Subject: [TR] tr3 bonnet dzus fastners

list, with respect to the tr3 honnet dzus fastners, is they are way one can 
prevent the paint from chipping due to the dzus fastners? i have noticed
that 
on many tr3's that after awhile the fastners rattle and causes the paint to 
chip away?  larrry schwartz 1960 tr3-a



**************Wondering what's for Dinner Tonight? Get new twists on family 
favorites at AOL Food.      
(http://food.aol.com/dinner-tonight?NCID=aolfod00030000000001)
This list supported in part by the Vintage Triumph Register
http://www.vtr.org


Triumphs at autox.team.net
http://autox.team.net/mailman/listinfo/triumphs

You are subscribed as auprichard at comcast.net

http://www.team.net/archive