[TR] TR6 rocker assembly oiling

[Don Spence]

Ed
Most likely it is as Randall has described, blocked at the camshaft  
bearing.  Simple solution is the external route. To avoid over oiling  
the head, install a tap in the line. A club member had a similar  
problem before the big three offered a kit. We made one with a brake  
line from NAPA, and a small tap from the plumbing store. It all just  
screwed together. We did have to install a two way adaptor into  
another galley plug for the idiot light sender and the oil pressure  
gauge as the  new line used the galley feed for one of these.
On 26-Mar-08, at 9:34 AM, triumphs-request at autox.team.net wrote:

> Or, you could add the external oil feed (which injects oil under full
> pressure into that hole).