[TR] Rear Wheel Axles and Front Grease Caps

[levilevi]

Try needle nosed vice grips.  A good tight grip and some wiggles back and
forth usually gets them off.

Bud

71TR6 CC57365 (Good 6)
66TR4A CTC57806 (The Wreck-Almost Parts)
66TR4A CTC57529 (The Project)
71F-250 Camper Special (Triumph Support Vehicle)
Z-50A Hardly Davidson 1977 Honda Mini-Trail Bike (Triumph Pit Bike)
  ----- Original Message -----
  From: spit6 at kning.com
  To: triumphs at autox.team.net
  Sent: Thursday, March 06, 2008 12:44 AM
  Subject: [TR] Rear Wheel Axles and Front Grease Caps


  Dear All,



  I've recently been pushed to accelerate my project.  J



  I've disassembled my project down to the chassis for quite some time.  I
was
  cleaning up the rear axles and noticed that I can't make them rotate.
  They're locked.  I've removed the brake lines, does that do anything to
make
  them lock?  Do I need to repack the grease seal?



  I also am trying to replace the front rotors, and I can't remove the grease
  caps.  Any ideas?  I just can't get a grip on it to pull it off.



  Appreciate it.



  Thanks,

  Kelvin

  Spit6 Project
  _______________________________________________

  Support Team.Net  http://www.team.net/donate.html

  This list supported in part by the Vintage Triumph Register
  http://www.vtr.org


  Triumphs at autox.team.net
  http://autox.team.net/mailman/listinfo/triumphs

  You are subscribed as levilevi at comcast.net

  http://www.team.net/archive