[TR] TR3 front apron

[tom white]

Removal is very straight forward.  Just make sure you get all the bolts.  Then
with a helper lift it out by the cross brace above the radiator.

Installation can be more tedious.  You have to get your fender beads seated.
I work from top to bottom tightening bolts as I go.  I have a problem with the
lower lip aligning with the fenders.  So I have moved my bumper brackets to
their rear position.  Now I install the bumper bolts over large washers and
tighten them.  This pulls the lip of the apron into alignment with the
fenders.  I finish tightening all the bolts and it is done.

Best regards,
Tom



_________________________________________________________________
Helping your favorite cause is as easy as instant messaging. You IM, we give.
http://im.live.com/Messenger/IM/Home/?source=text_hotmail_join