[TR] steering column inner bushings
tom white
tswhitez123 at hotmail.com
Wed Jun 18 05:06:00 MDT 2008
> Any advice on how to remove and replace the inner bushings on a TR4 steering
> column?
Put a drift punch on the rubber locking button of the old bushings and use a
BFH to collapse them. Then use a wood dowel to drive them out of the column.
When installing the new bushings begin with the locking buttons aligned with
their respective holes. Then tap them into position with a wood dowel of the
same outside diameter as the bushings. You may have to massage them back and
forth a little to align the buttons and holes.
Best regards,
Tom
_________________________________________________________________
The other season of giving begins 6/24/08. Check out the im Talkathon.
http://www.imtalkathon.com?source=TXT_EML_WLH_SeasonOfGiving
More information about the Triumphs
mailing list