[TR] steering column inner bushings

[Bob Danielson]

Gary,
The easiest way is to NOT remove them but to install Art Lipp's Delrin
bushings (http://www.trparts.com/newitems/column.html) right over them. You
can buy just the bushings from him for $25 or he'll rebuild your whole
column for $80. I went the bushing route on my TR6 over the winter. You can
see the process here http://tr6.danielsonfamily.org/SteeringColumn.htm


Bob Danielson
1975 TR6 CF38503U
Running w/ Throttle Body Injection
Toyota 5 Speed & Nissan LSD
http://tr6.danielsonfamily.org 


-----Original Message-----
From: triumphs-bounces+75tr6=tr6.danielsonfamily.org at autox.team.net
[mailto:triumphs-bounces+75tr6=tr6.danielsonfamily.org at autox.team.net] On
Behalf Of goh56agan at comcast.net
Sent: Tuesday, June 17, 2008 5:21 PM
To: triumphs at autox.team.net
Subject: [TR] steering column inner bushings

List,
Any advice on how to remove and replace the inner bushings on a TR4 steering
column?  I've tried tapping them out with a dowel but I,m not making much
progress.  Do the replacements go in any easier?  Thanks.
Gary O
This list supported in part by the Vintage Triumph Register
http://www.vtr.org


Triumphs at autox.team.net
http://autox.team.net/mailman/listinfo/triumphs

You are subscribed as 75tr6 at tr6.danielsonfamily.org

http://www.team.net/archive
No virus found in this incoming message.
Checked by AVG. 
Version: 8.0.93 / Virus Database: 270.3.0/1505 - Release Date: 6/16/2008
7:20 AM