[TR] TR3 gauge bezel rubber?

[fred thomas]

The"O" rings are intended as a "dust/dirt" protector, keeping them out of 
your gauges.  "FT"

>> Originally, I believe a
>> rubber ring was squezed up between the chrome bezel and the
>> metal console.
>> What can I use for this rubber ring?
>>     Moss sells a 'gauge mounting ring' (280-870) for $1.95
>> for TR4 gauges.  Is
>> this ring also used on TR3s?  Maybe is isn't needed?
>
> Certainly not a requirement, I ran without it for many years and never 
> knew
> the difference.  But it's kind of a nicety, helps keep the paint on the
> console from chipping.
>
> You can use the TR4 rings from Moss (TR3 gauges are same size and mount 
> the
> same way) or TRF sells the same thing for $.95 (P/N SLP171).
>
> Or what I did was to buy ordinary O-rings in the appropriate sizes from 
> MMC.
> They are square enough once they are installed <G>
>
> Randall
> _______________________________________________
>
> Support Team.Net  http://www.team.net/donate.html
>
> This list supported in part by the Vintage Triumph Register
> http://www.vtr.org
>
>
> Triumphs at autox.team.net
> http://autox.team.net/mailman/listinfo/triumphs
>
> You are subscribed as frede.thomas2 at verizon.net
>
> http://www.team.net/archive