[TR] Triumph letter mounting TR4

[Joe Curry]

The tape has a backing.  If you leave it on while sticking it to the back of
the letter, you can easily trim it with an Xacto Knife.  Then you can peel
the backing off when you get ready to apply the letters.

Joe

-----Original Message-----
From: triumphs-bounces+spitlist=cox.net at autox.team.net
[mailto:triumphs-bounces+spitlist=cox.net at autox.team.net] On Behalf Of
Randall
Sent: Saturday, August 23, 2008 9:12 AM
Cc: triumphs at autox.team.net
Subject: Re: [TR] Triumph letter mounting TR4

> Or better still, don't drill holes at all.  If you cut the 
> posts off the letters with a Dremmel tool and cutoff wheel, 
> you can use 3M double stick body trim tape to apply the lettering.  

How do you trim the tape to match the outline of the letter?

Randall
This list supported in part by the Vintage Triumph Register
http://www.vtr.org


Triumphs at autox.team.net
http://autox.team.net/mailman/listinfo/triumphs

You are subscribed as spitlist at cox.net

http://www.team.net/archive