[TR] Triumph letter mounting TR4

[Joe Curry]

Or better still, don't drill holes at all.  If you cut the posts off the
letters with a Dremmel tool and cutoff wheel, you can use 3M double stick
body trim tape to apply the lettering.  

It makes mistakes forgivable. It prevents the problem of rusting out around
the holes.  And it keeps the letters from vibrating as they are prone to do.

That is what I did several years ago and I have not lost a single letter.

Joe


-----Original Message-----
From: triumphs-bounces+spitlist=cox.net at autox.team.net
[mailto:triumphs-bounces+spitlist=cox.net at autox.team.net] On Behalf Of tom
white
Sent: Saturday, August 23, 2008 8:34 AM
To: Lee&John Howard; loumetelko at aol.com
Cc: triumphs at autox.team.net; dkspence at telus.net
Subject: Re: [TR] Triumph letter mounting TR4

Before you punch and drill the holes remember to tape the area with good
masking tape first.  This helps prevent cracking of the paint when you punch
and drill.

Best regards,
Tom