[TR] Alignment specs-now Manco toe in gauge

[John Mitchell]

A Manco gauge is a very low tech way of measuring toe-in, by showing the 
difference in width between the rear of the front tires and the front of 
the front tires.  It will not show whether the wheels are tracking 
straight ahead.  That can be determined if the car is pulling one 
direction or the other.  The PDF below shows it being used on a Toro 
workman and includes the directions for it's use.  

Bob, your welcome to use it whenever you want it.  I can drop it up to 
you next weekend if you'd like.  Golf would be good too:)    John



http://www.toro.com/customercare/commercial/bulletins/vehicles/pdf/12-05.pdf