[TR] Ball Joint Rubbers
Don Spence
dkspence at telus.net
Mon Apr 21 11:35:12 MDT 2008
Sorry to be so blunt but, dumb idea. While duct tape may be good
for many things, (except taping heating ducts) this is not one of
them. The exposure to moisture, air flow and flexing would soon cause
the tape to dry out and let go. As well, any contamination on the
rubber, including or especially shipping wax, would impair adhesion.
That and the convoluted surface would make it difficult to get a good
"set" in the first instance. Then you add the environment in which
you expect it to operate... The one thing that duct tape will stick
to forever, is itself, sticky side to sticky side. Other than that it
dries out relatively quickly and falls off.
Cheers
Don
On 21-Apr-08, at 12:00 PM, triumphs-request at autox.team.net wrote:
> From: tom white <tswhitez123 at hotmail.com>
> Date: April 21, 2008 7:51:00 AM MDT (CA)
> To: <terryrs at comcast.net>, <triumphs at autox.team.net>
> Subject: Re: [TR] Ball Joint Rubbers
>
>
> Duct tape over the rubbers.
>
> Best regards,
> Tom
More information about the Triumphs
mailing list