[TR] stamp or engrave?
John Macartney
standardtriumph at btinternet.com
Thu Apr 17 07:56:39 MDT 2008
Wouldn't disagree with any of that, Bill. Very succinctly put :::)))
Jonmac
----- Original Message -----
From: "Bill Davies" <bill at rarebits4classics.co.uk>
To: "'John Gillis'" <jgillis at tcd.ie>; "'Triumph List'" <triumphs at Autox.Team.Net>
Sent: Thursday, April 17, 2008 1:54 PM
Subject: Re: [TR] stamp or engrave?
>> Behalf Of John Gillis
>>
>> Quick 1- commission plates on early TR's and probably all Triumphs, were
>> the
>> numbers/letters stamped or engraved,
>
> John,
> Numbers were always stamped. Characters were 1/8" height until approx 1967,
> 3/16" thereafter. The company used at least three different typefaces in the
> 1/8" pattern. The prefix and main number was block stamped, with the final
> numeric character and any suffixes stamped separately. This means that most
> of the number will be well aligned with equal weight to the stamping, with
> much variation in the weight and position of the final number and suffixes,
> Cheers,
> Bill.
> _______________________________________________
>
> Support Team.Net http://www.team.net/donate.html
>
> This list supported in part by the Vintage Triumph Register
> http://www.vtr.org
>
>
> Triumphs at autox.team.net
> http://autox.team.net/mailman/listinfo/triumphs
>
> You are subscribed as standardtriumph at btinternet.com
>
> http://www.team.net/archive
More information about the Triumphs
mailing list