[TR] Coolant, draining heater core

[Bob]

BINGO
Worked, perfect.
Hose to heater valve (engine side of FW) goes to bottom of heater, so this
is best for draining into 1 pint or so container.
Apply compressed air to other hose (engine side of FW).
Then, disconnected inside heater hoses, maybe 2 tablespoons of coolant
drained out.
Thank you.

----- Original Message ----- 
From: <DLylis at hyattvoi.com>
To: <rpeglow at optonline.net>
Sent: Sunday, April 06, 2008 8:30 AM
Subject: Coolant


>
> I have not done this but I would bet that if you disconnect both hoses
from
> the engine side and introduced compressed air to the in hose you could
> collect most of it from the out hose and eliminate the carpet issues
> inside. With both hoses disconnected the pressure will not be a problem.
> Sent from my Blackberry wireless handheld
> ---ooo--- Internet Confidentiality Statement ---ooo---
>
> The information contained in this communication is confidential and is
> intended only for the use of the recipient named above, and may be legally
> privileged and exempt from disclosure under applicable law. If the reader
> of this message is not the intended recipient, you are hereby notified
that
> any dissemination, distribution or copying of this communication is
> strictly prohibited. If you have received this communication in error,
> please resend it to the sender and delete the original message and any
copy
> of it from your computer system. Opinions, conclusions and other
> information in this message that do not relate to our official business
> should be understood as neither given nor endorsed by this company.