[TR] FW: TR3 rear fender stay

[Scott Suhring]

Sorry, this didn't make it to the list.

Kent:

Yes, this is the one that Paul is referring to. The one end bolts into the
stiffening panel (item #19, page 67 of Moss catalog) caged nut.  What I am
not clear of is how does the other end that is bent at a right angle fit to
the fender?

Scott Suring
Mechanicsburg, PA
'70 TR6
'59 TR3

-----Original Message-----
From: triumphs-bounces+suhringtr36=comcast.net at autox.team.net
[mailto:triumphs-bounces+suhringtr36=comcast.net at autox.team.net] On Behalf
Of Kent Shrack
Sent: Wednesday, April 02, 2008 9:25 AM
To: Carl TR; dorpaul; triumphs at autox.team.net
Subject: Re: [TR] TR3 rear fender stay

I think Paul was talking about the small bracket, that goes up under the
fender near the tail light that has a captive nut.  Some on the list are
talking about the fender bracket that goes from the frame to the bottom of
the fender behind the rear wheel.  Two brackets that are completely
different.  I don't know the color of either.  On mine, the one up under the
back for the fender near the tail light is body color.  The strap on the
bottom from the frame to the fender is, or was, cadnium plated as I bought
new ones.  The original ones on my car, one of which was broken, were both
rusty with road tar.