[TR] Interesting cooling system web page

[Art McEwen]

TeriAnn Wakeman wrote:
>
>
> amcewen2 at cogeco.ca wrote:
>  my 3A is running considerably hotter then before.
>
> Do you have an original grille or an aftermarket one?
>
> Most aftermarket ones have 25% less area between the slats for air flow.
Aftermarket, where as before I had an original..
>
> Have you checked your timing?  retarded timing or a sticky advance 
> that doesn't always return will cause overheating as described.
I've been dicking with the timing in order to get it to start on cool 
days in the spring/fall so that might be a contributing factor.  

BTW with the 3/8 from the pully hole timing method where should the 
vacuum advance wheel be at the start of the process?