[TR] fan extension, fan belt, steering rack

Mark Hooper mhooper at digiscreen.ca
Sat Sep 1 10:47:57 MDT 2007


Pardon my ignorance, but I have a question. Do the eliminated parts contribute
in any way to balancing or dampening vibrations on the crankshaft? I've never
been sure whether or not it is just the crank pulley alone, or the pulley plus
heavy fan extension that were to act as the harmonic balancer. I've read that
the TR6 crankshaft is in need of balancing due to rather rough manufacturing
techniques.

Mark
1972 TR6


________________________________

From: triumphs-bounces+mhooper=digiscreen.ca at autox.team.net on behalf of Rick
Sent: Sat 01/09/2007 12:16 AM
To: Randall; triumphs at autox.team.net
Subject: Re: [TR] fan extension, fan belt, steering rack



> -----Original Message-----
snip

> Behalf Of Randall
snip
> > I have recently started
> > manufacturing fan eliminator kits for the TR3 and TR4.
>
> So, what exactly is your kit ?  A new front hub with a harmonic
> dampener and
> pulley to take the original wide belt ?
>
> May as well tell the entire list, since you mentioned it here first.
>
> Randall
>

Randall,

The kit is designed to eliminate the fan and fan extension when converting
to an electric fan.

After removal of the fan extension it will just slip onto the six bolts that
are already in place. No alterations to your car are required. The acorn
nuts, lock washers, and flat washers are all stainless steel. The new center
bolt is a grade 8 which is really overkill but a lot of Triumph owners
insist.

The kit includes the CNC billet aluminum hub, stainless acorn nuts and
washers, and grade 8 crank bolt with washers. Cost of the kit is $45 plus
shipping of $8 within the US.

Photos

http://topshamautoparts.com/tr6/tr3_4eliminator.jpg

http://topshamautoparts.com/tr6/tr34_eliminator_kit.jpg

thanks for asking,

Rick
http://topshamautoparts.com/tr6/
rick at sidedrafttbi.com


More information about the Triumphs mailing list