[TR] rewiring my TR3

[terryrs at comcast.net]

In addition to what the others said, John, I decided not to solder, but rather to goop the copper with a bit of dielectric.  Get good connection and still reduce the corrosion over time.  Too soon to tell if this works really well, but I don't see why not.

Terry Smith, '59 TR3A
New Hampshire 

-------------- Original message -------------- 
From: 60TR3A <60TR3A at cox.net> 

> I am just getting started rewiring my TR3 with a Dan Master's kit. I 
> have completed the rear lighting system & the gas tank float. I am 
> now beginning the instrument panel. There are a number of switches 
> that have hole in which you insert the wire and then clamp it in 
> place with the end of a machine screw. My question is should one 
> solder the end of the wire before clamping it or leave it unsoldered?? 
> 
> Thanks