[TR] OT- Automotive Creeper questions

[Bob Danielson]

There's this one (http://www.kreepster.com/) A bit pricey but if your wife
kicks you out of the bedroom, it looks like you could sleep on it.


Bob Danielson
1975 TR6 CF38503U
Running w/ Throttle Body Injection
http://tr6.danielsonfamily.org 


-----Original Message-----
From: triumphs-bounces+75tr6=tr6.danielsonfamily.org at autox.team.net
[mailto:triumphs-bounces+75tr6=tr6.danielsonfamily.org at autox.team.net] On
Behalf Of aribert
Sent: Sunday, October 14, 2007 11:32 PM
To: triumphs at autox.team.net
Subject: [TR] OT- Automotive Creeper questions

I am looking to upgrade my creeper.  I need something for use outside of the
garage where the creeper needs to roll over expansion joint gaps / slab
offsets.  Does any one here have experince with the plastic creeper called
"The Bone".  Other suggestions?  I know ther is an off pavement version of
the Bone but I am not willing to give up too much ground clearance.  I have
a custom made creeper for use inside of the garage that puts my backside
about 7/8 inch off of the pavement - I am spoiled using it but it is
hopeless over expansion joints (the underside clears the concrete by only
1/4 inch).
_______________________________________________
75tr6 at tr6.danielsonfamily.org

This list supported in part by the Vintage Triumph Register
http://www.vtr.org

Triumphs mailing list
Triumphs at autox.team.net
http://autox.team.net/mailman/listinfo/triumphs

No virus found in this incoming message.
Checked by AVG. 
Version: 7.5.488 / Virus Database: 269.14.10/1070 - Release Date: 10/14/2007
9:22 AM
 

No virus found in this outgoing message.
Checked by AVG. 
Version: 7.5.488 / Virus Database: 269.14.10/1070 - Release Date: 10/14/2007
9:22 AM