[TR] TR3: firewall (forgive me)

[wbeech]

Assuming that your car in LHD.  Are you seeing the bolts for the blanking
plate for the master/clutch cylinder unit, if the car was to have been RHD
they would be over there? 

Bill B
'58 TR-3A TS/30766 L (rolling restoration)
"A bad day in your TR just gives you license to go shopping on-line again!"

-----Original Message-----
From: triumphs-bounces+wbeech=flash.net at autox.team.net
[mailto:triumphs-bounces+wbeech=flash.net at autox.team.net] On Behalf Of Paul
Dorsey
Sent: Sunday, October 07, 2007 7:17 AM
To: list Triumph
Subject: [TR] TR3: firewall (forgive me)

On my '60 TR3 (TS71318L)
What are the 4 nuts & bolts thru the firewall for that located above the
passenger's right foot?
The distance apart these captive nuts are maybe like the 4 corners of a post
card?  (do i need to say 'bulkhead'?)

Thanks, Paul
_______________________________________________
wbeech at flash.net

This list supported in part by the Vintage Triumph Register
http://www.vtr.org

Triumphs mailing list
Triumphs at autox.team.net
http://autox.team.net/mailman/listinfo/triumphs

No virus found in this incoming message.
Checked by AVG Free Edition. 
Version: 7.5.488 / Virus Database: 269.14.2/1053 - Release Date: 10/6/2007
10:18 AM
 

No virus found in this outgoing message.
Checked by AVG Free Edition. 
Version: 7.5.488 / Virus Database: 269.14.2/1053 - Release Date: 10/6/2007
10:18 AM