[TR] 59 TR3A caliper shims

[Randall]

> Alternately, has anyone found anything that will work as a 
> substitute?

Haven't done it myself, but it should be easy enough to fabricate them from
shim stock (available from any industrial or machine supply place, like
McMaster-Carr
http://www.mcmaster.com/ or Enco
http://www.use-enco.com/CGI/INPDFF?PMPAGE=685&PMCTLG=00

Or, MMC will sell you pre-made shim washers (which would be more trouble to
install but save having to cut them out).

Randall