[TR] Z 28 TR3 Frame

[Andrew Uprichard]

My TR3b has the Z-28 mark as well.

Andrew

-----Original Message-----
From: triumphs-bounces+auprichard=comcast.net at autox.team.net
[mailto:triumphs-bounces+auprichard=comcast.net at autox.team.net] On Behalf Of
Randall
Sent: Monday, November 12, 2007 12:45 AM
To: triumphs at autox.team.net
Subject: Re: [TR] Z 28 TR3 Frame

> Hey TR folks - didn't TRIUMPH decide after developing the TR4 
> to continue making the TR3a (due to popular demand) as a 
> TR3b?

That part is kinda true.

> And wasn't that TR3b 4" wide r,

That part is not.  The TR3B frame was the same width (interchangeable with)
the TR3A frame.

The factory did look at putting a TR3 body on a TR4 frame & rear axle.  As I
recall, 3 prototypes were even built, and known as TR3-betas.  But not the
same thing as a TR3B.

Randall
This list supported in part by the Vintage Triumph Register
http://www.vtr.org

http://www.team.net/donate.html

Triumphs at autox.team.net
http://autox.team.net/mailman/listinfo/triumphs