[TR] TR3 Fuel pump blanking plate
Bob Danielson
75TR6 at tr6.danielsonfamily.org
Fri Nov 2 08:35:03 MST 2007
Frank's email is FGFO1 at aol.com and the plate he makes for the TR6 is 1/4"
thick and hasn't leaked a drop in the 2 years I've had it on.
Bob Danielson
1975 TR6 CF38503U
Running w/ Throttle Body Injection
http://tr6.danielsonfamily.org
-----Original Message-----
From: triumphs-bounces+75tr6=tr6.danielsonfamily.org at autox.team.net
[mailto:triumphs-bounces+75tr6=tr6.danielsonfamily.org at autox.team.net] On
Behalf Of Andrew Uprichard
Sent: Friday, November 02, 2007 8:58 AM
To: triumphs at autox.team.net
Subject: Re: [TR] TR3 Fuel pump blanking plate
Sorry to send this to everyone, but I am looking for my friend Frank in
California who has been making and selling fuel pump blanking plates (he has
a great life.......)
Hey Frank, what thickness are the plates ? Thin ones tend to leak and I
need a good seal after fitting my Webers. Let me know. Thanks !
Andrew Uprichard
This list supported in part by the Vintage Triumph Register
http://www.vtr.org
http://www.team.net/donate.html
Triumphs at autox.team.net
http://autox.team.net/mailman/listinfo/triumphs
No virus found in this incoming message.
Checked by AVG.
Version: 7.5.503 / Virus Database: 269.15.18/1104 - Release Date: 11/1/2007
6:47 PM
No virus found in this outgoing message.
Checked by AVG.
Version: 7.5.503 / Virus Database: 269.15.18/1104 - Release Date: 11/1/2007
6:47 PM
More information about the Triumphs
mailing list