[TR] Fwd: TR3A Intermittent overdrive

[Randall]

> amcewen2 at cogeco.ca wrote :

> $50 for presure gauge...

Not just the gauge, but also the funky adapter to connect it to the OD.

Of course, you can make your own adapter by buying a spare valve plug, then
drilling it and welding a fitting to it; but last I checked, a new plug is
over $25, and a decent glycerin-filled gauge is $20, and Jay also supplies a
hose ...

Or if you have access to a lathe, you could try machining your own adapter.
I just did that for my J-type (which is simpler than the A-type) ... if I
factor in wear and tear on the lathe, I made less than minimum wage on the
job.  But it's a hobby, right ?

Randall 
(Tedious but unavoidable disclaimer follows) 






CONFIDENTIALITY. This electronic mail and any files transmitted with it may contain information proprietary to NavCom Technology, Inc., or one of its affiliates, and are intended solely for the use of the individual or entity to whom they are addressed, shall be maintained in confidence and not disclosed to third parties without the written consent of the sender. If you are not the intended recipient or the person responsible for delivering the electronic mail to the intended recipient, be advised that you have received this electronic mail in error and that any use, dissemination, forwarding, printing, or copying of this electronic mail is strictly prohibited. If you have received this electronic mail in error, please immediately notify the sender by return mail.