[TR] TR3 Headlamp Caged nuts

[Scott Suhring]

That could be it, but not certain.

Scott Suhring
Mechanicsburg, PA
'70 TR6
'59 TR3

-----Original Message-----
From: triumphs-bounces+suhringtr36=comcast.net at autox.team.net
[mailto:triumphs-bounces+suhringtr36=comcast.net at autox.team.net] On Behalf
Of J.C. Hassall
Sent: Saturday, July 14, 2007 2:02 PM
To: Triumph Sports car discussion
Subject: Re: [TR] TR3 Headlamp Caged nuts

Scott Suhring wrote:
> Does anyone know of the part number for the clip on caged nuts that the
TR3
> headlamps screw into to hold the assembly to the nose, and who might still
> sell them?  TIA

Are you talking about Moss # 326-555? That p/n is shown for the TR250/6, 
but also used on the TR4.  Don't know about the TR3.  It's the hickey 
which presses into the front valence and a screw threads thru the 
headlamp assy into it.  The -4, -250 and -6 each use 3 per side.

hth

jim

-- 
J.C. Hassall
Blacksburg  VA
64 TR4 in autox preparation
95% finished, 90% to go
Triumphs mailing list
Triumphs at autox.team.net
http://autox.team.net/mailman/listinfo/triumphs