[TR] TR3 Headlamp Caged nuts

[J.C. Hassall]

Scott Suhring wrote:
> Does anyone know of the part number for the clip on caged nuts that the TR3
> headlamps screw into to hold the assembly to the nose, and who might still
> sell them?  TIA

Are you talking about Moss # 326-555? That p/n is shown for the TR250/6, 
but also used on the TR4.  Don't know about the TR3.  It's the hickey 
which presses into the front valence and a screw threads thru the 
headlamp assy into it.  The -4, -250 and -6 each use 3 per side.

hth

jim

-- 
J.C. Hassall
Blacksburg  VA
64 TR4 in autox preparation
95% finished, 90% to go