[TR] [6pack] Sway Bar Custom Mounts

[Dave1massey at cs.com]

In a message dated 12/8/2007 9:28:56 AM Central Standard Time, 
tswhitez123 at hotmail.com writes: 
> The sway bar increases spring rate as it is compressed.   If it is not 
> mounted
> straight up and down the rate of the bar will be diminished.
> 
The rate will be a cosine function of the angle which means that if the angle 
is off by 30 degrees you still have 83% of the original rate.  I wouldn't 
worry about a few degrees more or less unless you are an F1 race team.

Dave