[TR] Sparked out
tom white
tswhitez123 at hotmail.com
Sat Dec 1 10:17:06 MST 2007
Try drilling through the center of the plug threads with a 1/4 inch bit.
Soak the threads with penetrating oil. Then drive a piece of 1/4 inch square
stock steel into the hole with a hammer. And then back the threads out using
a wrench on the stock steel.
Best regards,
Tom
_________________________________________________________________
Put your friends on the big screen with Windows Vista. + Windows Live.
http://www.microsoft.com/windows/shop/specialoffers.mspx?ocid=TXT_TAGLM_CPC_M
ediaCtr_bigscreen_102007
More information about the Triumphs
mailing list